中文 | English
 
Home About us Cathodic Protection Products Inquiry Download Contact us
 
 
Products
 

 Ribbon

Ribbon and Mesh Ribbon MMO Anodes are used in concrete Cathodic Protection for protection of the concrete rebar.
Advantages
  • Uniform current distribution
  • Mesh ribbon width and spacing can be varied to fine tune cathodic protection current requirement
  • Easy to install during the construction process can beinstalled on rebar cages, via plastic spacers, before concrete pouring
  • Activation coating Mixed metal oxide coating
  • Manufactured under strict quality control procedures
The titanium ribbon acts as an inert conductor to electrically connect the MMO ribbon anode and reduce attenuation losses, and also connects to the positive cable via rod connectors. The titanium ribbon is connected to the MMO anode by spot welds applied at the point of crossover.
Material Specifications
Mesh Ribbon
Unit
Type 1
Type 2
Current Rating at 110 mA/m2 
mA/m
5.3
2.7
Dimensions Width
mm
20
10
Thickness  
mm
0.9
0.9
Unit Length 
m
26
26
Weight (approx) per roll of 26 m 
mg/roll
738
369
Electrical resistance  
Oh/m
0.22
0.43
Expected design life
Years
100
100
Anode Concrete Interface Maximum Current Density
 
 
 
FHWA limit
mA/m2
110
110
Short-term limit
mA/m2
220
220
Substrate Composition
ASTM 265 Titanium Grade 1
Catalyst
Mixed Metal Oxide for Oxygen Evolution
Current Distributor for Type 1 and Type 2
Width mm 15
mm
15
Thickness mm 1
mm
1
Weight g/m 68
g/m
68
Electrical resistance Ohm/m 0.040
Ohm/m
0.040
 
 
Copyright 2008-2010 SYNCOR Cathodic Protection Co,Ltd,All Rights Reserved