中文 | English
 
Home About us Cathodic Protection Products Inquiry Download Contact us
 
 
Products
 

 Ballast Tank Anodes

Ballast tank anodes are used for the protection of water ballast tanks. SYCNOR has designed and developed anodes in trapezoidal shape, in accordance with international standards. Our anodes meet current specifications for installation on new vessels, as well as for retrofit installations performed during a vessel’s special survey.
For application on tankers, aluminum anodes are not recommended to be installed on the cargo tanks, the tanks adjacent to cargo tanks, or on any locations where the potential energy exceeds 28kg m.
Various methods can be used to minimize the required time and cost of each installation. In order to minimize the risk of electrical discontinuity we recommend that anodes are welded. Bolted type anodes with various brackets, or doublers plates, can be designed and supplied upon request by the client.
Stand Off
 
 
 
 
 



Type
LX(W1+W2)XH (mm)
NW (kg)
GW (kg)
AT30
200X(65+50)X75
2.5
3.0
AT50
380X(65+50)X75
4.3
5.0
AT80
610X(65+50)X75
7.1
8.0
AT110
675X(65+50)X75
8.9
10.0
AT130
60X(85+75)X95
12.4
13.3
AT159
750X85+75)X95
14.5
15.6
AT210
1000X(85+75)X95
19.5
20.6
AT250
1220X(85+75)X95
23.5
25.0
AT310
1500X(85+75)X95
29.0
30.7
AT160
1500X(60+45)X68
13.5
15.3
AT180
1500X(65+45)X70
15.5
17.3
L=Length , W1=width lower, W2 Width Upper,  H=Height, NW=Net weight, GW=Gross weight
The anodes mentioned above can be produced with the following types of inserts as alternative installation methods:
Alternative anode type
(SC) Straight Core type
(FS) Flat Insert Stand of
(C) Clamp type (one flat bar, bottom protruding)       
 
 
 
(S) Clamp type (two flat bars, bottom protruding)
(F) Flat insert flush mounted     
(TP) Pit guard anodes
 
 
 
 
 
Copyright 2008-2010 SYNCOR Cathodic Protection Co,Ltd,All Rights Reserved